HomeSeer is the maker of a variety of home automation products. On this page we'll focus on it's Z-Wave devices
This is HomeSeer's USB Z-Wave interface which supports Z-Wave Plus (Gen5).
It will be found by the built-in macOS modem driver, so no 3rd party drivers need to be installed. It will show up as usbmodemXXXXXXX
where the XXXXXXX is a number derived from the USB port it's plugged into. Note that it will change if you move it to a different USB port so you'll need to reselect in the Z-Wave config dialog if you do.
This switch's basic on/off/dim functionality should work with Indigo 6. Indigo 7+ contains the following device specific support.
This switch's basic on/off functionality should work with Indigo 6. Indigo 7+ contains the following device specific support.