====== X10 Commands (indigo.x10.*) ======

Commands that are specific to X10 devices.

==== Send Address ====

This command will send an x10 address to the interface with NO function code.

^  Command Syntax Examples  ^
|<code> indigo.x10.sendAddress("A1")</code>|

^  Parameters  ^^^^
^  Parameter  ^  Required  ^  Type  ^  Description  ^
|direct parameter|  Yes  |  string  |X10 address|
|//''suppressLogging''//|  No  |  boolean  |//''True''// to keep the request from being logged into the event log window (default is //''False''//) 

==== Send Brighten ====

This will send the Brighten command to an x10 address.

^  Command Syntax Examples  ^
|<code> indigo.x10.sendBrighten("A1", delta=15)</code>|

^  Parameters  ^^^^
^  Parameter  ^  Required  ^  Type  ^  Description  ^
|direct parameter|  Yes  |  string  |X10 address|
|//''delta''//|  Yes  |  integer  |the amount to brighten by relative to the current brightness - valid values from 1 to 100  |
|//''suppressLogging''//|  No  |  boolean  |a boolean indicating if entries in the event log should be suppressed (default is False)|
|//''updateStatesOnly''//|  No  |  boolean  |use if you only want Indigo's internal device state representation to be updated - no actual X10 commands will be sent (default is False)|

==== Send Dim ====

This will send the Dim command to an x10 address.

^  Command Syntax Examples  ^
|<code> indigo.x10.sendDim("A1", delta=15)</code>|

^  Parameters  ^^^^
^  Parameter  ^  Required  ^  Type  ^  Description  ^
|direct parameter|  Yes  |  string  |X10 address|
|//''delta''//|  Yes  |  integer  |the amount to dim by relative to the current brightness - valid values from 1 to 100  |
|//''suppressLogging''//|  No  |  boolean  |a boolean indicating if entries in the event log should be suppressed (default is False)|
|//''updateStatesOnly''//|  No  |  boolean  |use if you only want Indigo's internal device state representation to be updated - no actual X10 commands will be sent (default is False)|

==== Send Extended ====

This will send an Extended command to an x10 address.

^  Command Syntax Examples  ^
|<code> indigo.x10.sendExtended("A1", data=10, command=128)</code>|

^  Parameters  ^^^^
^  Parameter  ^  Required  ^  Type  ^  Description  ^
|direct parameter|  Yes  |  string  |X10 address  |
|//''command''//|  Yes  |  integer  |the comand to send  |
|//''data''//|  Yes  |  integer  |the data to send  |
|//''suppressLogging''//|  No  |  boolean  |a boolean indicating if entries in the event log should be suppressed (default is False)|
|//''updateStatesOnly''//|  No  |  boolean  |use if you only want Indigo's internal device state representation to be updated - no actual X10 commands will be sent (default is False)|

==== Send Hail Request ====

This will send a Hail Request command to the interface.

^  Command Syntax Examples  ^
|<code> indigo.x10.sendHailRequest("A1")</code>|

^  Parameters  ^^^^
^  Parameter  ^  Required  ^  Type  ^  Description  ^
|direct parameter|  Yes  |  string  |X10 address  |
|//''suppressLogging''//|  No  |  boolean  |a boolean indicating if entries in the event log should be suppressed (default is False)|

==== Send Hail Reply ====

This will send a Hail Reply command to the interface.

^  Command Syntax Examples  ^
|<code> indigo.x10.sendHailReply("A1")</code>|

^  Parameters  ^^^^
^  Parameter  ^  Required  ^  Type  ^  Description  ^
|direct parameter|  Yes  |  string  |X10 address  |
|//''suppressLogging''//|  No  |  boolean  |a boolean indicating if entries in the event log should be suppressed (default is False)|

==== Send On ====

This will send an ON command to an x10 address.

^  Command Syntax Examples  ^
|<code>indigo.x10.sendOn("A1")</code>|
|<code>indigo.x10.sendOn("A1", suppressLogging=True)</code>|
|<code>indigo.x10.sendOn("A1", updateStatesOnly=True)</code>|
|<code>indigo.x10.sendOn("A1", suppressLogging=True, updateStatesOnly=True)</code>|

^  Parameters  ^^^^
^  Parameter  ^  Required  ^  Type  ^  Description  ^
|direct parameter|  Yes  |  string  |X10 address  |
|//''suppressLogging''//|  No  |  boolean  |a boolean indicating if entries in the event log should be suppressed (default is False)|
|//''updateStatesOnly''//|  No  |  boolean  |use if you only want Indigo's internal device state representation to be updated - no actual X10 commands will be sent (default is False)|

==== Send Off ====

This will send an OFF command to an x10 address.

^  Command Syntax Examples  ^
|<code>indigo.x10.sendOff("A1")</code>|
|<code>indigo.x10.sendOff("A1", suppressLogging=True)</code>|
|<code>indigo.x10.sendOff("A1", updateStatesOnly=True)</code>|
|<code>indigo.x10.sendOff("A1", suppressLogging=True, updateStatesOnly=True)</code>|

^  Parameters  ^^^^
^  Parameter  ^  Required  ^  Type  ^  Description  ^
|direct parameter|  Yes  |  string  |X10 address  |
|//''suppressLogging''//|  No  |  boolean  |a boolean indicating if entries in the event log should be suppressed (default is False)|
|//''updateStatesOnly''//|  No  |  boolean  |use if you only want Indigo's internal device state representation to be updated - no actual X10 commands will be sent (default is False)|

==== Send Status Response On ====

This will send a Status Response On command to the interface.

^  Command Syntax Examples  ^
|<code> indigo.x10.sendStatusResponseOn("A1")</code>|

^  Parameters  ^^^^
^  Parameter  ^  Required  ^  Type  ^  Description  ^
|direct parameter|  Yes  |  string  |X10 address  |
|//''suppressLogging''//|  No  |  boolean  |a boolean indicating if entries in the event log should be suppressed (default is False)|

==== Send Status Response Off ====

This will send a Status Response Off command to the interface.

^  Command Syntax Examples  ^
|<code> indigo.x10.sendStatusResponseOff("A1")</code>|

^  Parameters  ^^^^
^  Parameter  ^  Required  ^  Type  ^  Description  ^
|direct parameter|  Yes  |  string  |X10 address  |
|//''suppressLogging''//|  No  |  boolean  |a boolean indicating if entries in the event log should be suppressed (default is False)|