Differences

This shows you the differences between two versions of the page.

Link to this comparison view

indigo_5_documentation:x10_specific_commands [2019/01/25 22:53]
indigo_5_documentation:x10_specific_commands [2019/01/26 00:10] (current)
Line 1: Line 1:
 +====== X10 Commands (indigo.x10.*) ======
 +
 +Commands that are specific to X10 devices.
 +
 +==== Send Address ====
 +
 +This command will send an x10 address to the interface with NO function code.
 +
 +^  Command Syntax Examples ​ ^
 +|<​code>​ indigo.x10.sendAddress("​A1"​)</​code>​|
 +
 +^  Parameters ​ ^^^^
 +^  Parameter ​ ^  Required ​ ^  Type  ^  Description ​ ^
 +|direct parameter| ​ Yes  |  string ​ |X10 address|
 +|//''​suppressLogging''//​| ​ No  |  boolean ​ |//''​True''//​ to keep the request from being logged into the event log window (default is //''​False''//​) ​
 +
 +==== Send Brighten ====
 +
 +This will send the Brighten command to an x10 address.
 +
 +^  Command Syntax Examples ​ ^
 +|<​code>​ indigo.x10.sendBrighten("​A1",​ delta=15)</​code>​|
 +
 +^  Parameters ​ ^^^^
 +^  Parameter ​ ^  Required ​ ^  Type  ^  Description ​ ^
 +|direct parameter| ​ Yes  |  string ​ |X10 address|
 +|//''​delta''//​| ​ Yes  |  integer ​ |the amount to brighten by relative to the current brightness - valid values from 1 to 100  |
 +|//''​suppressLogging''//​| ​ No  |  boolean ​ |a boolean indicating if entries in the event log should be suppressed (default is False)|
 +|//''​updateStatesOnly''//​| ​ No  |  boolean ​ |use if you only want Indigo'​s internal device state representation to be updated - no actual X10 commands will be sent (default is False)|
 +
 +==== Send Dim ====
 +
 +This will send the Dim command to an x10 address.
 +
 +^  Command Syntax Examples ​ ^
 +|<​code>​ indigo.x10.sendDim("​A1",​ delta=15)</​code>​|
 +
 +^  Parameters ​ ^^^^
 +^  Parameter ​ ^  Required ​ ^  Type  ^  Description ​ ^
 +|direct parameter| ​ Yes  |  string ​ |X10 address|
 +|//''​delta''//​| ​ Yes  |  integer ​ |the amount to dim by relative to the current brightness - valid values from 1 to 100  |
 +|//''​suppressLogging''//​| ​ No  |  boolean ​ |a boolean indicating if entries in the event log should be suppressed (default is False)|
 +|//''​updateStatesOnly''//​| ​ No  |  boolean ​ |use if you only want Indigo'​s internal device state representation to be updated - no actual X10 commands will be sent (default is False)|
 +
 +==== Send Extended ====
 +
 +This will send an Extended command to an x10 address.
 +
 +^  Command Syntax Examples ​ ^
 +|<​code>​ indigo.x10.sendExtended("​A1",​ data=10, command=128)</​code>​|
 +
 +^  Parameters ​ ^^^^
 +^  Parameter ​ ^  Required ​ ^  Type  ^  Description ​ ^
 +|direct parameter| ​ Yes  |  string ​ |X10 address ​ |
 +|//''​command''//​| ​ Yes  |  integer ​ |the comand to send  |
 +|//''​data''//​| ​ Yes  |  integer ​ |the data to send  |
 +|//''​suppressLogging''//​| ​ No  |  boolean ​ |a boolean indicating if entries in the event log should be suppressed (default is False)|
 +|//''​updateStatesOnly''//​| ​ No  |  boolean ​ |use if you only want Indigo'​s internal device state representation to be updated - no actual X10 commands will be sent (default is False)|
 +
 +==== Send Hail Request ====
 +
 +This will send a Hail Request command to the interface.
 +
 +^  Command Syntax Examples ​ ^
 +|<​code>​ indigo.x10.sendHailRequest("​A1"​)</​code>​|
 +
 +^  Parameters ​ ^^^^
 +^  Parameter ​ ^  Required ​ ^  Type  ^  Description ​ ^
 +|direct parameter| ​ Yes  |  string ​ |X10 address ​ |
 +|//''​suppressLogging''//​| ​ No  |  boolean ​ |a boolean indicating if entries in the event log should be suppressed (default is False)|
 +
 +==== Send Hail Reply ====
 +
 +This will send a Hail Reply command to the interface.
 +
 +^  Command Syntax Examples ​ ^
 +|<​code>​ indigo.x10.sendHailReply("​A1"​)</​code>​|
 +
 +^  Parameters ​ ^^^^
 +^  Parameter ​ ^  Required ​ ^  Type  ^  Description ​ ^
 +|direct parameter| ​ Yes  |  string ​ |X10 address ​ |
 +|//''​suppressLogging''//​| ​ No  |  boolean ​ |a boolean indicating if entries in the event log should be suppressed (default is False)|
 +
 +==== Send On ====
 +
 +This will send an ON command to an x10 address.
 +
 +^  Command Syntax Examples ​ ^
 +|<​code>​indigo.x10.sendOn("​A1"​)</​code>​|
 +|<​code>​indigo.x10.sendOn("​A1",​ suppressLogging=True)</​code>​|
 +|<​code>​indigo.x10.sendOn("​A1",​ updateStatesOnly=True)</​code>​|
 +|<​code>​indigo.x10.sendOn("​A1",​ suppressLogging=True,​ updateStatesOnly=True)</​code>​|
 +
 +^  Parameters ​ ^^^^
 +^  Parameter ​ ^  Required ​ ^  Type  ^  Description ​ ^
 +|direct parameter| ​ Yes  |  string ​ |X10 address ​ |
 +|//''​suppressLogging''//​| ​ No  |  boolean ​ |a boolean indicating if entries in the event log should be suppressed (default is False)|
 +|//''​updateStatesOnly''//​| ​ No  |  boolean ​ |use if you only want Indigo'​s internal device state representation to be updated - no actual X10 commands will be sent (default is False)|
 +
 +==== Send Off ====
 +
 +This will send an OFF command to an x10 address.
 +
 +^  Command Syntax Examples ​ ^
 +|<​code>​indigo.x10.sendOff("​A1"​)</​code>​|
 +|<​code>​indigo.x10.sendOff("​A1",​ suppressLogging=True)</​code>​|
 +|<​code>​indigo.x10.sendOff("​A1",​ updateStatesOnly=True)</​code>​|
 +|<​code>​indigo.x10.sendOff("​A1",​ suppressLogging=True,​ updateStatesOnly=True)</​code>​|
 +
 +^  Parameters ​ ^^^^
 +^  Parameter ​ ^  Required ​ ^  Type  ^  Description ​ ^
 +|direct parameter| ​ Yes  |  string ​ |X10 address ​ |
 +|//''​suppressLogging''//​| ​ No  |  boolean ​ |a boolean indicating if entries in the event log should be suppressed (default is False)|
 +|//''​updateStatesOnly''//​| ​ No  |  boolean ​ |use if you only want Indigo'​s internal device state representation to be updated - no actual X10 commands will be sent (default is False)|
 +
 +==== Send Status Response On ====
 +
 +This will send a Status Response On command to the interface.
 +
 +^  Command Syntax Examples ​ ^
 +|<​code>​ indigo.x10.sendStatusResponseOn("​A1"​)</​code>​|
 +
 +^  Parameters ​ ^^^^
 +^  Parameter ​ ^  Required ​ ^  Type  ^  Description ​ ^
 +|direct parameter| ​ Yes  |  string ​ |X10 address ​ |
 +|//''​suppressLogging''//​| ​ No  |  boolean ​ |a boolean indicating if entries in the event log should be suppressed (default is False)|
 +
 +==== Send Status Response Off ====
 +
 +This will send a Status Response Off command to the interface.
 +
 +^  Command Syntax Examples ​ ^
 +|<​code>​ indigo.x10.sendStatusResponseOff("​A1"​)</​code>​|
 +
 +^  Parameters ​ ^^^^
 +^  Parameter ​ ^  Required ​ ^  Type  ^  Description ​ ^
 +|direct parameter| ​ Yes  |  string ​ |X10 address ​ |
 +|//''​suppressLogging''//​| ​ No  |  boolean ​ |a boolean indicating if entries in the event log should be suppressed (default is False)|
  
indigo_5_documentation/x10_specific_commands.txt ยท Last modified: 2019/01/26 00:10 (external edit)
 

© Perceptive Automation, LLC. · Privacy