Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		 Previous revision
zwave_devices:homeseer [2018/02/18 18:49] – created jayzwave_devices:homeseer [2026/04/07 18:27] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +====== HomeSeer ======
 +[[http://www.homeseer.com| HomeSeer]] is the maker of a variety of home automation products. On this page we'll focus on it's Z-Wave devices
 +
 +===== SmartStick+ =====
 +
 +This is HomeSeer's USB Z-Wave interface which supports Z-Wave Plus (Gen5).
 +
 +It will be found by the built-in macOS modem driver, so no 3rd party drivers need to be installed. It will show up as **''usbmodemXXXXXXX''** where the //XXXXXXX// is a number derived from the USB port it's plugged into. Note that it will change if you move it to a different USB port so you'll need to reselect in the Z-Wave config dialog if you do.
 +
 +
 +[[http://www.indigodomo.com/devices/795/|Device details]]
 +
 +===== HS-WD100+ Dimmer Switch =====
 +
 +This switch's basic on/off/dim functionality should work with Indigo 6. Indigo 7+ contains the following device specific support.
 +
 +==== Configuration Options ====
 +
 +  * **Reverse switch controls** - reverses the on/off ends of the paddle
 +  * **Local dim delta** - sets the amount of dim change used for each dim step while being locally controlled
 +  * **Local dim timer** - sets the delay between dim step changes while being locally controlled
 +  * **On/Off dim delta** - sets the amount of dim change used for each dim step when receiving ON/OFF dims
 +  * **On/Off dim timer** - sets the delay between dim step changes when receiving ON/OFF dims
 +
 +==== Events ====
 +
 +  * **Button pressed**
 +  * **Button double tap**
 +  * **Button triple tap**
 +  * **Button held down**
 +  * **Button released**
 +
 +
 +[[http://www.indigodomo.com/devices/571/|Device details]]
 +
 +===== HS-WS100+ Relay Switch =====
 +
 +This switch's basic on/off functionality should work with Indigo 6. Indigo 7+ contains the following device specific support.
 +
 +==== Configuration Options ====
 +
 +  * **LED mode** - changes how the LED on the switch works: Nightlight (on when device is off), Mirrors load (on when device is on), Off (never turns on)
 +  * **Reverse switch controls** - reverses the on/off ends of the paddle
 +
 +==== Events ====
 +
 +  * **Button pressed**
 +  * **Button double tap**
 +  * **Button triple tap**
 +  * **Button held down**
 +  * **Button released**
 +
 +
 +[[http://www.indigodomo.com/devices/796/|Device details]]