INSTEON TriggerLinc

The INSTEON TriggerLinc (available for purchase here) broadcasts wireless RF commands as its magnetic contact closure is activated. Those RF commands are received by an AccessPoint RF and then relayed to Indigo (via the PowerLinc interface). Indigo, upon seeing this command, will update its internal ON/OFF state for that TriggerLinc Device.

If you have a new and interesting way of using an INSTEON TriggerLinc apply for an account (follow the instructions on the bottom of the start page) and write it up!

The TriggerLinc supports two groups sending commands:

1. Group 1 - you'll receive an ON command from this group when the contact is open and an OFF command from this group when the contact is closed
2. Group 2 - you'll receive an ON command when the battery appears to be running low